Require Log In with KaseyaOne

Please refer to your module documentation and module release notes for more information.

To enable Require Log In with KaseyaOne for BullPhish ID, do the following:

1. Log into BullPhish ID using your credentials in the usual way.
   
2. On your Organization's dashboard, click Settings and the Settings page opens with the KaseyaOne tab selected.
   
   
3. Turn on the Require Log In with KaseyaOne toggle.
4. Under User Exceptions, click the drop-down arrow and select the users who will be exempt from this condition — that is, they will be able to log in using either Log In with KaseyaOne or their local credentials.
   
   

For more information, refer to BullPhish ID Help > Individual User Guides.

To enable Require Log In with KaseyaOne for ConnectBooster, do the following:

1. Log into ConnectBooster in the usual way and click Configurations > KaseyaOne on the left navigation menu.
   
   
2. Turn on the Require Log In with KaseyaOne toggle.
   
   
3. Under User Exceptions, click the drop-down arrow and select the users who will be exempt from this condition — that is, they will be able to log in using either Log In with KaseyaOne or their local credentials.
   

For more information, refer to Associate your ConnectBooster and KaseyaOne Accounts and ConnectBooster Help.

To enable Require Log In with KaseyaOne for Dark Web ID, do the following:

1. Log into Dark Web ID in the usual way.
2. Navigate to My Account > Organization Settings> KaseyaOne.
3. Turn on the Require Log In with KaseyaOne toggle.
   
   
4. Under User Overrides, click the drop-down arrow and select the users who will be exempt from this condition — that is, they will be able to log in using either Log In with KaseyaOne or their local credentials.

For more information, refer to for Dark Web ID Integrations and Dark Web ID Help.

To enable Require Log In with KaseyaOne for Datto Partner Portal, do the following:

1. Log into the Datto Partner Portal and navigate to Admin > Security Settings.

2. Go to the Single Sign-on section of the page that shows the KaseyaOne logo and make sure that Enable Log In with KaseyaOne is enabled.

3. In the Require Log In with KaseyaOne section, turn on the Require Log In with KaseyaOne toggle to enable the feature. Turning off the toggle disables the feature, allowing users to log in to the Partner Portal with either their KaseyaOne Unified Login credentials or their local authentication.

   

4. Under User Exceptions (this section appears only after you turn on the Require Log In with KaseyaOne toggle):

   • Click Add (the plus icon) next to each user who will be exempt from the Require Log In with KaseyaOne condition when enabled. The value in the corresponding Exception field changes to Yes.

   • Click Delete (the dustbin icon) next to a user to remove that user from the exceptions list. The value in the corresponding Exception field changes to No.

   By default, no users will be exempt (Exception = No for all users by default).

For more information, refer to Enable Require Login with KaseyaOne for DPP.

To enable Require Log In with KaseyaOne for Datto EDR, do the following:

1. Log in to Datto EDR in the usual way.
2. Navigate to Admin > Settings > KaseyaOne.
3. In the Require Log In with KaseyaOne section, turn on the Require Log In with KaseyaOne toggle.
   
   
4. Under User Exceptions, click the drop-down arrow and select the users who will be exempt from this condition — that is, they will be able to log in using either Log In with KaseyaOne or their local credentials.
   

For more information, refer to Datto EDR Help.

To enable Require Log In with KaseyaOne for Datto RMM, do the following:

1. Log in to Datto RMM in the usual way and navigate to Setup > Integrations > KaseyaOne.
2. Turn on the Require Log In with KaseyaOne toggle.
   
   
3. Click Confirm on the pop-up notification message that appears reminding you that users will no longer be able to log in to Datto RMM through Datto Partner Portal.
   
   
4. Under User Exceptions, click the drop-down arrow and select the users who will be exempt from this condition — that is, they will be able to log in using either Log In with KaseyaOne or Datto Partner Portal authentication
   

For more information, refer to Datto RMM Help.

To enable Require Log In with KaseyaOne for Graphus, do the following:

1. Log in to Graphus in the usual way.
2. Click MSP Administration on the top menu and then click KaseyaOne on the left navigation menu.
3. In the Unified Login section, make sure Enable Log In with KaseyaOne is enabled.
4. In the Require Log In with KaseyaOne section, turn on the Require Log In with KaseyaOne toggle.
   
   
5. Under User Exceptions, click the drop-down arrow and select the users who will be exempt from this condition — that is, they will be able to log in using either Log In with KaseyaOne or their local credentials.
6. Click Save when done.

For more information, refer to Require Log In with KaseyaOne for Graphus and Graphus Knowledge Base.

To enable Require Log In with KaseyaOne for Kaseya Quote Manager, do the following:

1. From the left navigation menu, navigate to Settings > KaseyaOne.
2. Turn on the Require Log In with KaseyaOne toggle to enable the feature.
   
   
3. Under User Exceptions, click the drop-down arrow and select the users who will be exempt from the Require Log In with KaseyaOne condition if enabled. Enter also the URL that exempt users will use.

For more information, refer to KaseyaOne integration for Kaseya Quote Manager and Kaseya Quote Manager Help.

NOTE  All RapidFire modules (Compliance Manager, Cyber Hawk, Network Detective Pro, VulScan), although purchased individually, are accessed from the RapidFire Tools portal. After Unified Login is enabled for the RapidFire Tools portal, each module can be accessed through Log In with KaseyaOne.

To enable Require Log In with KaseyaOne for Rapid Fire Tools, do the following:

1. In the RapidFire Tools portal, navigate to T Complete > Settings on the left navigation menu.
   
   
2. Turn on the Require Log In with KaseyaOne toggle to enable the feature.
   
   
3. Under User Overrides, click the drop-down arrow and select the individual users who will be exempt from this condition — that is, they will be able to log in using either Log In with KaseyaOne or their local credentials.
4. Under Global Access Level Overrides, click the drop-down arrow and select the Global Access Levels that will be exempt from this condition. Users with the specified access level(s) will be able to log in using either Log In with KaseyaOne or their local credentials.

For more information, refer to Rapid Fire Tools Help.

To enable Require Log In with KaseyaOne for UniView, do the following:

1. Log in to the UniView Portal in the usual way and click the cogwheel icon on the header bar.
   
   
2. Click the Integrations tab, locate the KaseyaOne integration and click Show configuration.
   
   
3. Turn on the Require Log In with KaseyaOne toggle to enable the feature.
   
   
4. Under User Exceptions, click the drop-down arrow and select the users who will be exempt from this condition — that is, they will be able to log in using either Log In with KaseyaOne or their local credentials.

For more information, refer to the UniView Portal Guide.